NanoPulse Shield for Arduino

NanoPulse Shield for Arduino is designed to enable communication between microwave sensor modules and widely spread Arduino microcontroller boards. The purpose of the shield is adding presence detection, respiration monitoring and motion detection features to the capabilities of the Arduino kits.

Occupancy Sensor NP BW 02.00

- true occupancy sensor with breathing detection

- sensitivity area up to 3 meters / 10 feet

- easy installation and maintenance

- easy integration with monitoring systems

- suitable for IP networks

- powered over Ethernet cable

Occupancy Sensor NP LW 01.01

- true occupancy sensor with breathing detection

- sensitivity area up to 4 meters / 13 feet

- wide viewing angle

- easy installation and maintenance

- suitable for IP networks

- powered over Ethernet cable

Breathing Sensor NP SU 6.1

- true occupancy sensor with breathing detection

- sensitivity area up to 1 meter / 3 feet

- embedded microphone and night light

- easy installation and maintenance

- easy integration with smartphones

- suitable for baby monitoring

Occupancy Sensor NP BW 01.00

- true presence sensor with breathing detection
- sensitivity area up to 4 meters / 13 feet
- easy installation and maintenance
- easy integration with monitoring systems
- suitable for IP networks
- powered over Ethernet cable

Mounting Rack for NP BW 01.00 / 02.00

Mounting rack with rotating clip is designed for use with the NP BW 01.00 and NP BW 02.00 microwave occupancy sensors and allows the sensors to be oriented in the desired direction.
Occupancy sensors with the mounting rack can be securely installed on the floor, shelves, walls and ceiling.

Sensor Module NP BW LC 1.0

- sensitivity zone up to 3 meters / 10 feet

- separate Tx and Rx external antennas

- CPU with built-in ADC for data acquisition

- low voltage DC power source

- UART interface for control module connection

Sensor Module NP IBT 1.0

- microwave motion detector electronic module

- detects motion activity or vacancy

- adjustable range up to 2.4 meters / 8 feet

- fits in installations on the floor, shelves, walls or ceiling

- can be intergrated with your existing alarm system

Sensor Module NP SU AP 6.1

- sensitivity area 1 meter / 3 feet

- integrated antenna system

- integrated microphone

- analog LF output signal

- temperature and humidity sensors

- low voltage DC power supply

Sensor Module NP BW 1.0

- sensitivity zone up to 4 meters / 13 feet

- single external Tx/Rx antenna

- powerful CPU for data processing

- low voltage DC power source

- solid state output relay

- USB link with a host

Interface Module NP SU DP 6.1

NP SU DP 6.1 data aquisition, processing and transmission interface module is used for supplying power and taking control over the NP SU AP 6.1 microwave breathing sensor module, as well as for transferring processed or raw data over the ISM 868 MHz, Wi-Fi or Bluetooth wireless interfaces

Interface Module NP MB BW LC

NP MB BW LC data processing interface module is used for supplying power and taking control over the NP BW LC 1.0 microwave occupancy sensor module, as well as for transferring processed or raw data collected by the NP BW LC 1.0 radio module over the F/UTP twisted pair, Wi-Fi or Bluetooth

Interface Module NP MB BW

NP MB BW data transfer interface module is used for supplying power to the NP BW 1.0 microwave presence sensor RF module, as well as for transferring processed or raw data collected by the NP BW 1.0 radio module over the F/UTP twisted pair, Wi-Fi or Bluetooth

PoE Module NP PWR 8-34

NP PWR 8-34 PoE power module is a DC-DC converter that takes input DC voltage in the 8 to 34 V range from the twisted-pair lines, and converts it into the operating voltage of the occupancy sensor modules, breathing sensor modules and motion sensor modules as well as into the operating voltage of their interface boards.

PoE Module RT9400

RT9400 PoE Power Module is a DC-DC converter that takes input DC voltage in the 36 to 57 V range from the twisted-pair lines, and converts it into the operating voltage of the occupancy sensor modules, breathing sensor modules and motion sensor modules as well as into the operating voltage of their interface boards.

Wi-Fi Module ESP-12

ESP-12 Wi-Fi radio module adds Wi-Fi interface to the NanoPulse interface modules and enables wireless communication between NanoPulse occupancy sensors and user applications.

Bluetooth Module HC-05

HC-05 Bluetooth radio module adds Bluetooth functionality to the NanoPulse interface modules and enables wireless communication between NanoPulse occupancy sensors and user applications.

Microwave Antenna 5.8 GHz NP-A21-5800

Wideband directional UHF patch antenna NP-A21-5800 with 5800 MHz central frequency and 300 MHz frequency band at SWR equal to 2.5 can be used as Tx or Rx antenna standalone or as a part of the antenna grid in radio communication and radar applications.

Microwave Antenna 5.8 GHz NP-A22-5800

Wideband directional UHF patch antenna NP-A22-5800 with 5870 MHz central frequency and 240 MHz frequency band at SWR equal to 2.5 can be used as Tx or Rx antenna standalone or as a part of the antenna grid in radio communication and radar applications.

Microwave Antenna 5.8 GHz NP-A44-5800

Wideband directional UHF patch antenna NP-A44-5800 with 5800 MHz central frequency and 240 MHz frequency band at SWR equal to 2 can be used as Tx or Rx antenna standalone or as a part of the antenna grid in radio communication and radar applications.

Microwave Antenna 7.2 GHz NP-A21-7200

Wideband directional UHF patch antenna NP-A21-7200 with 7200 MHz central frequency and 380 MHz frequency band at SWR equal to 2.5 can be used as Tx or Rx antenna standalone or as a part of the antenna grid in radio communication and radar applications.

Microwave Antenna 7.3 GHz NP-A22-7200

Wideband directional UHF patch antenna NP-A22-7200 with 7300 MHz central frequency and 300 MHz frequency band at SWR equal to 2.5 can be used as Tx or Rx antenna standalone or as a part of the antenna grid in radio communication and radar applications.

Microwave Antenna 7.2 GHz NP-A44-7200

Wideband directional UHF patch antenna NP-A44-7200 with 7200 MHz central frequency and 510 MHz frequency band at SWR equal to 2.5 can be used as Tx or Rx antenna standalone or as a part of the antenna grid in radio communication and radar applications.