Data Processing Interface Module NP MB BW LC

NP MB BW LC data processing interface module is used for supplying power and taking control over the NP BW LC 1.0 microwave occupancy sensor module, as well as for transferring processed or raw data collected by the NP BW LC 1.0 radio module over the F/UTP twisted pair, Wi-Fi or Bluetooth, depending on the interface module modification. Data transfer protocol is well documented and can be requested from NanoPulse, Inc. NP MB BW LC data processing interface module has a powerful ARM Cortex M3 microcontroller on board, and thus NP MB BW LC interface module is capable for processing of the raw data received from NP BW LC 1.0 radio module via UART interface. On the other hand, any other board capable for UART communication can communicate with the NP MB BW LC data processing interface module and use it for data processing and format conversion.

Interface Module Specifications

• Interfaces to the NP BW LC 1.0 radio module  - UART, GPIO
• Connectors for communication with the NP BW 1.0 radio module - 10-pin СI1110М1H connector
• External interfaces (depending on the model) - Ethernet, Ethernet + WiFi, Ethernet + Bluetooth
• External connectors - 8P8C RJ-45 socket, USB socket type B
• LEDs - green, red, diameter 3 mm
• Microcontroller - STM32F103CBT6 with ARM Cortex-M3 core
• Power source - USB 5 V 150 mA or external DC power source 5 .. 30 V 150 mA AC / DC or PoE lines
• Dimensions of the interface module (including all connectors) - 143 x 110 x 19 mm
• Net weight - 60 g