Data Acquisition and Processing Interface Module NP SU DP 6.1

NP SU DP 6.1 data aquisition, processing and transmission interface module is used for supplying power and taking control over the NP SU AP 6.1 microwave breathing sensor module, as well as for transferring processed or raw data collected by the NP SU AP 6.1 radio module over the ISM 868 MHz, Wi-Fi or Bluetooth wireless interfaces, depending on the interface module modification. Data transfer protocol is well documented and can be requested from NanoPulse, Inc. NP SU DP 6.1 data acquisition, processing and transmission interface module has a powerful ARM Cortex M3 microcontroller on board, and thus NP SU DP 6.1 interface module is capable for processing of the raw analog data received from NP SU AP 6.1 radio module via ADC. On the other hand, any other board providing low frequency analog output signals can communicate with the NP SU DP 6.1 data acquistion, processing and transmission interface module and use it for data processing and format conversion.

Interface Module Specifications

• Interfaces to the NP SU AP 6.1 radio module  - analog signals, TWI, GPIO
• Connectors for communication with the NP SU AP 6.1 radio module - 10-pin СI1110М1H connector
• External interfaces (depending on the model) - ISM 868 MHz, WiFi, Bluetooth
• External connectors - SDIO slot, USB socket type micro-B
• Microcontroller - STM32F205RET6 with ARM Cortex-M3 core
• Power source - USB 5 V 500 mA or external DC power source 3 .. 5 V 500 mA DC
• Dimensions of the interface module (including all connectors) - 70 x 45 x 10 mm
• Net weight - 60 g