Data Transfer Interface Module NP MB BW

NP MB BW data transfer interface module is used for supplying power to the NP BW 1.0 microwave presence sensor RF module, as well as for transferring processed or raw data collected by the NP BW 1.0 radio module over the F/UTP twisted pair, Wi-Fi or Bluetooth, depending on the interface module modification. Data transfer protocol is well documented and can be requested from NanoPulse, Inc. NP MB BW data transfer interface module does not have a microcontroller on board, and thus NP BW 1.0 radio module controls all interface components installed on the NP MB BW data transfer interface module via UART, SPI and GPIO interfaces. On the other hand, any other board capable for UART, SPI or GPIO communication can communicate with the NP MB BW data transfer interface module and use it for data format conversion.

Interface Module Specifications

• Interfaces to the NP BW 1.0 radio module  - SPI, UART, GPIO
• Connectors for communication with the NP BW 1.0 radio module - 2 x IDC 2x5 pin connectors, 2.00 mm step
• External interfaces (depending on the model) - Ethernet, Ethernet + WiFi, Ethernet + Bluetooth
• External connectors - 8P8C RJ-45 socket, USB socket type B
• LEDs - green, red, diameter 3 mm
• Microcontroller - N/A
• Power source - USB 5 V 150 mA or external DC power source 5 .. 30 V 150 mA AC / DC or PoE lines
• Dimensions of the interface module (including all connectors) - 143 x 110 x 19 mm
• Net weight - 60 g